Tripp Lite PDUMV20NET El manual del propietario descargar pdf (Pagina 4)

4

Connecting the PDU

2-1

(Models with IEC power inlet or 3-pole

IEC 309 plug only.) Select models have

a detachable power cord. Attach the

included power cord to the PDU by

inserting the IEC connector

A

of the

power cord into the IEC power inlet

B

located near the end of the PDU. Use

the included bracket

C

to secure the

power cord connection.

Note: Optionally, a user-supplied power cord

can be attached to the PDU by connecting it

to the IEC inlet. Do not attempt to attach a

user-supplied power cord unless it is certified

to be compatible with the input power source

that will be used by the PDU.

2-2

(Optional - models with input plug

adapter only.) Select models include an

input plug adapter that converts the

twist-lock input plug to a straight-blade

input plug. Attach the input plug

adapter

A

to the input plug

B

if you

wish to plug the PDU into a compatible

straight-blade outlet.

2-3

Connect the input plug to a compatible

AC power outlet. If the PDU does not

have a circuit breaker, it should be

provided with a branch-rated over-

current protection device that matches

the rated amperage of the PDU.

Note: The AC power source should not share

a circuit with a heavy electrical load.

2-4

(Optional) If you attached the cord

retention bracket(s), tie each

equipment power cord to the retention

bracket. Attach each cord to the

retention shelf by looping the cord and

securing it with one of the included

cable ties

A

. Make sure that each cord

can be unplugged from the PDU without

removing the cable tie.

Installation continued

2-1

2-2

2-3

2-4

A

C

B

A

A

B

201112142 933151.indb 4 1/24/2012 2:09:52 PM

1 2 3 4 5 6 7 8 9 ... 35 36

Comentarios a estos manuales

Sin comentarios