Tripp-lite NetCommander B072-016-1 Manual de usuario

Owner’s ManualCopyright © 2008 Tripp Lite. All rights reserved. All trademarks are the property of their respective owners. The policy of Tripp Lite i

10106. Operation (continued)By default the primary Hotkey is the [Shift] key. You have the ability to replace [Shift] with one of four different choic

11The Auto Skip option allows you to choose whether you want inactive ports to be selectable or not. If the Auto Skip option is turned on, inactive po

12126. Operation (continued)By default, each port is named "Computer 01," "Computer 02," etc. To personalize these names for each

13In the Settings window, navigate to the Time line and press [Enter]. The Time settings window appears (Figure 6.10).SCN - Sets the amount of time sp

14In the Settings window, navigate to the Security line and press [Enter]. The Security settings window appears (Figure 6.11).When Password Security i

1515Highlight the Users option in the OSD Settings menu and press [1. Enter]The Users will be represented in the six columns on the right side of the

1616You can tune the image of any remote computer screen.To adjust the screen image:In the OSD main menu, highlight the computer you want to adjust1.

17Figure 7.5.1 KVM Switch Update WindowKVM SwitchSIUsStatus box7.3 Connecting the Firmware Upgrade Cable7.4 Installing the Software7.5 Starting and Co

18Figure 7.5.2 COM Port Options WindowBefore upgrading your firmware, verify that you are not already using the most current firmware. To do this, obt

19Verifying the Server Interface Unit's version numberBefore you can check a Server Interface Unit, you must uncheck the Switch Unit box options.

1. Features 32. System Components 33. Compatibility 34. Configuration 34.1 Front Panel 34.2 Back Panel 45. Installation 45.1 Rackmount Considera

2020Firmware Update generates one log file per session that displays a chronological list of actions. You can read the log file in any ASCII text edit

2121The connected PS/2 keyboard does not have a special SUN keypad to perform special functions in the SUN Operating System environment. When a B078-0

2222This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limit

2323Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You'll be automatically entered into a drawi

1111 W. 35th Street, Chicago, IL 60609 USA 773.869.1234 (USA) • 773.869.1212 (International) www.tripplite.com2009XXXXX 93-2520_EN

33Access and control multiple multi-platform computers from a single console• Hot-swappable: disconnect and reconnect USB computers without rebooting•

45. Installation45.2 Rackmounting the NetCommander KVMUse the L-shaped brackets and screws provided to mount the KVM in a server rack as illustrated

55.4 Connecting the NetCommander KVM System55. Installation (continued)The Server Interface Unit gets its power from the connected computer. In the ca

665. Installation (continued)Plug in the KVM. Use only the power cord supplied with the unit.1. Switch ON the computers. 2. 5.6 Connecting the Power S

77Figure 5.9 Cascading NetCommander KVM SwitchesSIU = Server Interface Unit5. Installation (continued)To cascade two or more NetCommander KVM Switches

886. Operation6.1 Basic Operation6.2 Keyboard Hotkeys6.3 On-Screen Display6.4 Navigating the OSD6.5 Selecting a ComputerSwitch between the connected c

99Figure 6.6 Settings Window6. Operation (continued)Press [F2] to open the OSD Settings window (Figure 6.6). With the highlight line on the word GENER